Ferrous and Non-ferrous Spectrum Analyzers

Specification CMOS -based, spark discharge, metal detectionUltra-low limits of detectionHigh integration, reliability, stabilityEnergy saving 50%, material savingLowing operating costSmall size, light weight, easy to move and installMulti-substrate upgrade easy, without changes to increase the hardwareSummary W5 Optical Emi

Featured Products

CMOS -based, spark discharge, metal detection
Ultra-low limits of detection
High integration, reliability, stability
Energy saving 50%, material saving
Lowing operating cost
Small size, light weight, easy to move and install
Multi-substrate upgrade easy, without changes to increase the hardware

W5 Optical Emission Spectrometer bring in the advanced technology from Europe. It is the 4th generation Arc/Spark-OES with high performance lowing operating cost for metal analysis and this is the latest research and development of detection equipment. The overall optical design has been enhanced, and with improvements of CMOS technology used to further improve the performance of the W5 while retaining the major benefit of earlier units. The CMOS spectrometer is not only contain the full spectrum characteristics of CCD spectrometer but also the extremely low detection limit for non-metallic elements such as C, S, P, B, As, N etc. The operation is simple and easy to learn. The test result is stable and accuracy. It is a good choice of all common metals for incoming and outgoing product quality control.

W5 Optical Emission Spectrometer(spark OES) is used for applications in metal elemental analysis, trace element analysis for science and industry like Metallurgy, Foundry, Mechanical Engineering, Scientific Research, Product Inspection, Automobile, Petrochemical Engineering, Shipbuilding, Electrics, Aerospace, Nuclear Power, Metallic and Nonferrous Metallic Smelting, Processing and Recycling. It is including full element analysis range, but at same time the element analysis amount can be bespoke.

Detection Matrices:
Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)
Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)
Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)
Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)
Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)
Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)
Titanium(Ti) and its alloys
Zinc(Zn) and its alloys
Lead(Pb) and its alloys
Tin(Sn) and its alloys
Argentum(Ag) and its alloys
Small sample, special size sample and wire detection

Optical system
Optical structureThe Paschen Runge construction full vacuum type optics system
Room temperature35ºC±0.5ºC
Wavelength range170-580nm
Focal length 400mm 
Grating line 3600m1/mm 
First order spectral line dispersion rare 1.2nm/mm 
Detector  Multi block high performance linear CMOS array  
Average resolution ratio 10pm/pixel 
Excitation table
Gas Rushing argon(99.999%)
Argon flow rate When excited: 3-5L/min
Standby time: no need for standby traffic
Electrode Tungsten electrode technology
Purge Automatic purge function
Make upThermal deformation self-compensation design
Analyze the gapSample stage:3.4 mm
Excitation light
Frequency 100-1000HZ
Discharge current1-400A
Special technologyOptimization of discharge parameters design
Pre -combustionHigh-energy pre-combustion technology
ProcessorHigh end ARM, high-speed data synchronization acquisition and processing
Data collection system
Interface Ethernet data transmission based on DM9000A
Enter 220VAC 50/60Hz
The requirements of power and environment
Power Maximum:700W standby:40W
Working temperature10-35ºC(temperature ≥5°C)
Working humidity20-85%
Spectrum Analyzer for Ferrous and Non-Ferrous Metals
Packing & Shipping
Spectrum Analyzer for Ferrous and Non-Ferrous Metals
Spectrum Analyzer for Ferrous and Non-Ferrous Metals
Spectrum Analyzer for Ferrous and Non-Ferrous Metals
Spectrum Analyzer for Ferrous and Non-Ferrous Metals
Spectrum Analyzer for Ferrous and Non-Ferrous Metals
Spectrum Analyzer for Ferrous and Non-Ferrous Metals


Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours